SUMMER SALE $50 OFF LOG*1 COAT & DECK*1 COAT each.

  • HOME
  • ORDER LOG*1 COAT
  • ORDER DECK*1 COAT
  • ORDER SINGLE GALLONS
  • Order> Free Samples
  • ORDER
  • WOOD TONES
  • ABOUT US
  • CUSTOMER PICS
  • GOOGLE Reviews
  • Q & A & Curing Info
  • PDS Prep Application Info
  • SDS
  • Blog
  • Shipping & Refund Policy
  • Guarantee /Service Terms
  • CONTACT MESSAGE
  • More
    • HOME
    • ORDER LOG*1 COAT
    • ORDER DECK*1 COAT
    • ORDER SINGLE GALLONS
    • Order> Free Samples
    • ORDER
    • WOOD TONES
    • ABOUT US
    • CUSTOMER PICS
    • GOOGLE Reviews
    • Q & A & Curing Info
    • PDS Prep Application Info
    • SDS
    • Blog
    • Shipping & Refund Policy
    • Guarantee /Service Terms
    • CONTACT MESSAGE
  • Sign In
  • Create Account

  • Orders
  • My Account
  • Signed in as:

  • filler@godaddy.com


  • Orders
  • My Account
  • Sign out

Signed in as:

filler@godaddy.com

  • HOME
  • ORDER LOG*1 COAT
  • ORDER DECK*1 COAT
  • ORDER SINGLE GALLONS
  • Order> Free Samples
  • ORDER
  • WOOD TONES
  • ABOUT US
  • CUSTOMER PICS
  • GOOGLE Reviews
  • Q & A & Curing Info
  • PDS Prep Application Info
  • SDS
  • Blog
  • Shipping & Refund Policy
  • Guarantee /Service Terms
  • CONTACT MESSAGE

Account

  • Orders
  • My Account
  • Sign out

  • Sign In
  • Orders
  • My Account

PDS & Application info for LOG*1 COAT & DECK*1 COAT

LOG*1 COAT PRODUCT DATA SHEET

Download PDF

DECK*1 COAT Product Data Sheet

Download PDF

LOG*1 COAT Application Guidelines

Download PDF

DECK*1 COAT Application Guidelines

Download PDF

How to Tell if SUNDANCE Stain Sealers are Compatible with an Existing Finish

The goal is always to remove as much of the old finish as possible with the least amount of prepping, work, and expense before applying our stain sealer.

To see if our stain can work with your existing finish without major prepping, consider these two tests:


  1. Water Absorption Test:
    • Pour water onto the surface.
    • If the water is absorbed rather than beading up, our stain should be able to be applied after a skillful pressure washing, pending it removes most of the old finish. 


  1. Fingernail Test:
    • Scratch the surface with your fingernail.
    • If the old finish can be scratched to bare wood, skillful pressure washing may prep the wood sufficiently for our stain to work well. (By skillful PW refers to a large PW with 3500-4000 psi, 3.7 to 4.0 gallons per minute, and a white tip. Some follow-up sanding may be required. 
    • The wand should stay perpendicular to the wood and be used in a sweeping motion, pulling away at the end of the stroke. The sweet spot is typically 5 - 8 inches from the wood, pending the stroke speed and pressure used. Care should be taken not to get too close and damage, i.e., burn or dig into the wood.
  • Color Limitations: If much of the prior existing finish color is still showing (e.g., in soffits, nooks and crannies, wood grain, or behind gutters) after prepping, your color choices will be limited to a similar color.
  • Flaking or Shiny Finishes: If the old finish is flaking or shiny, it must be removed before applying our stain. This will typically require possible stripping, sanding, and/or media blasting.
  • Organic, Acrylic, & Glycol Finishes: Polymerizing stain sealer finishes that contain a significant amount of organic oils (like linseed oil), acrylics, or propylene glycol will eventually break down and become patchy. These finishes must be removed before applying our stain. 


*Do Not Apply on wood that will not allow penetration

Always do a test area for color verification before application!

Stain color lightens as it Cures out

Curing Process Q & A

Download PDF

ATTENTION RE: OPENING LIDS!


The quality buckets are opened by pulling the tab off the lid. They are purposely work to remove, but very doable to keep from coming open if the bucket is knocked over. Be sure to hammer down the lid securely after finishing!   

Suggested Applicators

Roller Cover for Floor

Roller cover won't flatten on you.  Great for both applying and back- rolling floors. Don't roll too fast close to house as it can spatter! Make  Z pattern upon laying on floor so as to spread out product and then roll out.

Brush for Cracks

Great for back brushing and staining cracks as you can screw a pole in the brush and won't have to bend over.

Small Roller for Spindles

Small Roller for Spindles

Great for doing spindles and tight hard to get to areas.

We stand behind our products 100%! If anyone has any issue with our products, we work with them to resolve the problem and will give a 100% refund if there's some quality issue with our stain sealers! Sundance Coatings LLC


  • HOME
  • ORDER LOG*1 COAT
  • ORDER DECK*1 COAT
  • ORDER SINGLE GALLONS
  • Order> Free Samples
  • WOOD TONES
  • ABOUT US
  • CUSTOMER PICS
  • GOOGLE Reviews
  • Q & A & Curing Info
  • PDS Prep Application Info
  • SDS
  • Blog
  • CONTACT MESSAGE

.

FrEE SAMPLES + $1 shipping each